3
WARNING: KEEP YOUR CONTROL DRY! Allowing the control to
get wet can cause damage to its electronics and/or make it operate
incorrectly, causing a hazardous condition.
WARNING: FIRE HAZARD, BURN HAZARD! Even quality electronics
can fail CAUSING THE FAN TO RUN CONSTANTLY, RESULTING IN
EXCESSIVE TEMPERATURES! Power draft fans can get the pit
temperature higher than natural draft. Use extra caution in opening
the pit and determining fan placement. Always inspect the probe
wires for damage which can cause the fan to run constantly causing
the pit to become excessively hot.
WARNING: FIRE HAZARD, BURN HAZARD! FLAMES, SPARKS, AND
LIT EMBERS CAN EXIT ANY OPENING ON THE PIT CAUSING FIRE!
Keep the pit located a safe distance away from flammable objects
including buildings, walls, solvents, cars, fuel, wood piles, furniture,
etc. and use caution when opening the pit. An ember that has fallen
or is ejected from the pit can be blown by a light wind into a garage or
other structure, debris field, woods, or grass field and cause fire. Have
a fire extinguisher and water supply available near the pit. If the pit
is used on a wooden or combustible surface such as a wooden deck,
place the pit on a non-flammable pad intended for this purpose.
WARNING: FIRE HAZARD, BURN HAZARD! Even quality electronics
can fail and cause the temperature to read incorrectly. Use a
redundant dial thermometer as a backup temperature sensor
to verify the control’s reading of the pit temperature.
WARNING: SMOKE CAN COMBUST WHEN OXYGEN IS
INTRODUCED AND PRODUCE SEVERE BURNS! ALWAYS USE
CAUTION WHEN OPENING THE LID OR DOOR OF THE PIT.
1 Safety Warnings
Read and understand this user’s guide completely before
installing or using this product!
INSTALLATION/SAFETY INFORMATION:
To Next Page
Loading...