Digital Barriers EDGEVIS HD-IP150 - Appendix A - Troubleshooting and Frequently Asked Questions

EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE
ISSUED: 10 NOVEMBER 2020 PAGE 11
Appendix A - Troubleshooting and frequently asked
questions
How many channels does the HD-IP150 support?
The HD-IP150 can record up to two cameras, and transmit one of those cameras.
What level of recording and streaming performance is achievable?
Based on the processing power of the HD-IP150, the unit can typically achieve 25/30 fps of 1080p quality recording
whilst simultaneously streaming one 1080p quality video at 10 fps.
What recording functions does the HD-IP150 support?
The HD-IP150 can be set up to record continuously, or to record on an alarm trigger. Recordings can be set to
overwrite old recordings automatically, or to stop on full.
What indicative recording times and streaming rates are achievable?
The HD-IP150 records the incoming video stream from each IP camera without modification. The options set (e.g.
frame-rate, bandwidth) when configuring the IP camera will directly affect the recording time. Below are the
approximate recording times for two cameras and various storage options when the IP cameras are set to typical
settings:
Frame rate
IP Camera b/w
480GB SSD
960Gb SDD
1 fps
1.4 Mbps
16 days
32 days
6.25 fps
3 Mbps
8 days
16 days
12.5 fps
5 Mbps
4 days
8 days
25 fps
7 Mbps
3 days
6 days
Below are the approximate recording times for two SD cameras:
Frame rate
IP Camera b/w
480GB SSD
960Gb SDD
1 fps
100Kbps
200 days
100 days
6.25 fps
250 Kbps
80 days
40 days
12.5 fps
500 Kbps
40 days
20 days
25 fps
1 Mbps
20 days
10 days