Picture 3-20 Enter the manual Continuously moving mode
3) Use MPG to operate X axis
Picture 3-21 Enter the MPG mode
3.3.4 Main Page Parameter adjustments
The values FRO, SRO, SRJ, F, S Coordinate system and the M codes can easily be changed
Click till the display highlights what you want to adjust and then click or .
Click till the Feed Status displays “MPG”. Use the MPG to move the machine.
The FRO parameters. Under “READY” press till FRO is highlighted (bold).
With and adjust the value between 0% to 300%
The Spindle adjustment controls the spindle’s speed. Highlight SRO and use and to
adjust the spindle speed from 0% to 200%
1) FRO
2) SRO
Page -29Digtital Dream 4 Axis Motion Controller DDCS V2.1 User’s Manual
To Next Page
Loading...
