Need help?Do you have a question about the Digital Dream UC300 and is the answer not in the manual?
General| Brand | Digital Dream |
|---|---|
| Model | UC300 |
| Category | Controller |
| Language | English |
Connects the UC300 controller to a PC via USB for Mach3 software communication.
Details connecting stepper or servo motors for machine control using pulse and direction signals.
Explains the interface for controlling the spindle motor speed and operation.
Describes the DB9 port for general output signals and its pin assignments.
Interface for extending serial devices like IO extensions or HMI.
Details the optically isolated input ports for switches, limits, and probes.
How to select between Standard MPG and Digital Dream MPG using a function switch.
Interface for operating FRO, SRO, and SJR using potentiometers for adjustment.
Explains power supply connections for the controller system and IO ports using 24VDC.
Describes the function of LED indicators for power status and Mach3 communication.
Instructions for copying and installing the DigitalDream plugin for Mach3 software.
Steps to open Mach3 software and create a new profile using the installed plugin.
How to verify that the DigitalDream plugin is enabled within Mach3's plugin configuration.
Configuring motor steps per unit, velocity, and acceleration for precise axis movement.
Assigning pins for motor outputs, input signals, and spindle control within Mach3.
Configuring the MPG (Manual Pulse Generator) type and settings within Mach3 software.
To Next Page
