Digital Projection Titan Quad 2000 - Technical Specifications

Digital Projection Titan Quad / 800 / 930 Series APPENDIX F: GLOSSARY OF TERMS Reference Guide
195
Rev H October 2013
Frame rate
The number of frames shown per second (fps). In TV and video, a frame rate is the rate at which the display device scans the screen to
“draw” the frame.
Frame rate multiplication
To stop low frame rate 3D images from ickering, frame rate multiplication can be used, which increases the displayed frame rate by two or
three times.
Gamma
A nonlinear operation used to code and decode luminance. It originates from the Cathode Ray Tube technology used in legacy television
sets.
Ghosting
An artifact in 3D image viewing. Ghosting occurs when an image intended for one eye is partially seen by the other eye.
Ghosting can be removed by optimizing the dark time and sync delay.
Global setting
A projector setting that affects all inputs. In the OSD, global settings are indicated with a globe icon.
HDCP (High-bandwidth Digital Content Protection)
An encryption scheme used to protect video content.
HDTV(HighDenitionTelevision)
A television system with a higher resolution than SDTV and EDTV. It can be transmitted in various formats, notably 1080p and 720p.
Hertz (Hz)
Cycles per second.
Notes