Need help?Do you have a question about the Digital Projection 7000 Series and is the answer not in the manual?
General| Contrast Ratio | 2000:1 (Full On/Full Off) |
|---|---|
| Lamp Life | 2000 Hours |
| Light Source | UHP lamp |
| Lens Shift | Vertical: +/- 50%, Horizontal: +/- 25% (varies with lens) |
| Inputs | HDMI, DVI, VGA, Component, Composite |
Lists all components included in the projector package for user verification upon delivery.
Provides an overview of the projector's physical features, including front/rear views, remote control, and control panel layout.
Details the procedure for safely removing and fitting the projector lens, lamps, and color wheel.
Guides on how to mount and position the projector relative to the screen for optimal viewing and stability.
Explains how to turn the projector on, select input signals, and display test patterns.
Describes the various video and audio input/output connectors and their pin configurations for different signal types.
Table detailing compatible signal types, resolutions, refresh rates, and supported input ports.
Outlines connections for external control systems like Screen Trigger, USB, RS232, and LAN.
Provides detailed wiring diagrams and pin assignments for all signal and control connectors.
Explains the functions of all buttons on the remote control for operating the projector.
Guides on navigating the projector's on-screen menus, including submenus, sliders, and commands.
Introduces the main menu categories available for configuring the projector settings.
Details settings related to image quality such as Picture Mode, Brightness, Contrast, Color, Tint, and Sharpness.
Covers settings for managing input signals, including horizontal/vertical position, phase, clock, resolution, and auto-sync.
Contains settings for Overscan, Video System, Video Setup, and Closed Captioning.
Includes general setup configurations like Auto Search, Auto Power, Standby Mode, and Background settings.
Provides a summarized overview of the projector's menu structure and available controls.
Covers language selection, lamp control, projection modes, fan modes, and advanced installation settings.
Outlines the three methods for controlling the projector externally: serial, LAN, and embedded LAN utility.
Details the RS232 commands, including header codes, set/get commands, and return result strings for control.
Explains how to configure and use PJLink for network control, including IP addressing and host names.
Describes the web-based utility for controlling basic functions like power, volume, and input selection over the network.
To Next Page