Digital Projection 7000 Series User Manual

Digital Projection E-Vision 7000 Series Introduction Remote Communications Guide
51
Rev B May 2013
Introduction
The projector can be controlled by using an external control system in three different ways:
• All of the projector’s features can be controlled via a serial connection, using the control strings described in this guide.
• All of the projector’s features can be controlled via a LAN connection, using the industry standard PJLInk commands.
For more information about this, see PJLink later in this guide.
• A number of basic picture and input settings can be controlled directly using the embedded LAN Control utility.
For more information about this, see LAN Control Utility later in this guide.
Notes
Details of how to connect to
the projector using the LAN or
RS232 input, can be found in the
Connections Guide.

Digital Projection 7000 Series Specifications

General

Brand	Digital Projection
Model	7000 Series
Category	Projector
Language	English