Digital Projection 7000 Series User Manual

Digital Projection E-Vision 7000 Series Changing The Lens, Lamps And Color Wheel Installation and Quick-Start Guide
6
Rev B May 2013
Changing The Lens, Lamps And Color Wheel
Removing the lens
• Remove the lens cap.
• Push in the lens release lever, and turn the lens anti-clockwise.
• Remove the lens.
Fitting the lens
• Position the lens so that the label marked ‘O’ is at the top, and gently insert it all the way
into the lens mount.
• Turn the lens clockwise until it clicks into place.
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
The projector lens is shipped
separately.
‘O’

Digital Projection 7000 Series Specifications

General

Brand	Digital Projection
Model	7000 Series
Category	Projector
Language	English