Digital Projection 7000 Series User Manual

Digital Projection E-Vision 7000 Series A Tour Of The Menus Operating Guide
Page 44
Rev B May 2013
Reset
All Reset
• Projector will ask for conrmation before restoring all settings to factory defaults.
• When the warning message appears, use or to select YES or NO, then press
ENTER/SELECT to conrm your selection.
Filter Timer Reset
• Projector will ask for conrmation before resetting the timer to zero.
• When the warning message appears, use or to select YES or NO, then press
ENTER/SELECT to conrm your selection.
Information
• The nal submenu gives information about the projector, eg:
Notes
Do NOT do this unless you are
sure that you want to restore ALL
settings to their factory defaults.
Do NOT do this unless you are
sure that you want to reset the
Filter Timer to zero.
Installation Menu
Information submenu
Installation menu continued

Digital Projection 7000 Series Specifications

General

Brand	Digital Projection
Model	7000 Series
Category	Projector
Language	English