Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
Picture Menu
Advance Setting Submenu
Increasing the Red content will
make the image feel ‘warmer’, Blue
will make it feel ‘colder’.
Advance Setting submenu
Signal Type
• Set this to Auto, except when the projector has problems selecting between RGB,
YCrCb and YPrPb.
Color Temperature
• Set this to suit the specication of the input source, or to improve the appearance of the
projected image.
Red, Blue
• Set these to improve the appearance of the projected image.
Color Manager
• Press ENTER to open the Color Manager sub-menu.
• Select from Red, Green, Blue, Cyan, Magenta or Yellow and press ENTER.
• Use the sliders to adjust the Hue, Saturation and Value of each color as required.
Picture menu continued
To Next Page
Loading...
Need help?
General
