Digital Projection 7000 Series User Manual

Digital Projection E-Vision 7000 Series Menu Map Operating Guide
Page 45
Rev B May 2013
Menu Map
Menu Submenus and controls
PICTURE
Picture Mode Standard, Game, Movie, Presentation
BrilliantColor 0, 1, 2
Brightness
Contrast
Color
Tint
Sharpness
Advanced Setting
Signal Type Auto, RGB, YCrCb, YPrPb
Color Temperature Standard, Cold, Warm
Red
Blue
Color Manager Hue, Saturation and Value settings for: Red, Green, Blue, Cyan, Magenta and Yellow
Film Mode
Noise Reduction Off, Level 1, Level 2, Level 3
Dynamic Black On, Off
Reset Projectorwillaskforconrmationbeforerestoringallsettingsinthismenu(exceptPictureModeandSignal
Type) to factory defaults.
SIGNAL
Horizontal Position
Vertical Position
Phase
Clock
Reset Projectorwillaskforconrmationbeforerestoringthefoursettingsabovetofactorydefaults.
Resolution Auto, Wide, 4:3
Auto Sync On, Off
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full detail.
Some menu options and controls
may not be available due to settings
in other menus. These will be
shaded grey on the actual menu.
Where it would be helpful, some
menu options are described in more
detail earlier in this operating guide.

Digital Projection 7000 Series Specifications

General

Brand	Digital Projection
Model	7000 Series
Category	Projector
Language	English