[17]
• To exit from the zoom mode, click the right and select “ZOOM EXIT’ on the menu.
Enable PTZ mode. (Please refer to “3.6 PTZ Operation” for detail.) The available PTZ options
depend on the camera’s ONVIF integration. See the camera’s manual for more information.
Freeze the current live view. System clock (date/time information) will continue running at the
bottom of the screen. Select “FREEZE” again to resume the live view.
View the setup camera menu.
Users can setup resolution, frame, etc. The available options depend on the camera’s ONVIF
integration. See the camera’s manual for more information.
1. Click the GET STREAM button and get the current camera status.
2. Click the CAMERA INFO button to check the camera’s information such as model name, IP
address, port, MAC Address, etc.
3. MAINTENANCE – User can camera reset, reboot, firmware upgrade and setup to use the live
buffering function on NVR.
• Soft Reset: Reset camera settings except for basic network settings like IP address,
subnet and gateway or DHCP settings.
• Hard Reset: Reset all camera settings (factory reset).
- Reboot the camera
Scheduled Reboot: Set the schedule to reboot the camera
: Upgrade the camera firmware
To Next Page
Loading...