9 | Chapter 1 : DVR User’s Manual
1.3 System Startup and Shutdown
1.3.1 System Startup
After connecting peripheral devices such as cameras, monitors, and a mouse to the DVR, connect the 12VDC 6.6Amps power
supply to the power jack on the rear panel of the DVR.
The boot-up screen will display as shown below. Please wait until the boot-up process completes.
When boot-up process completes, [LOGIN] Window will appear. Select the user name and enter the password.
Then, press [OK] button.
Default Login is “Admin”, and the password box is blank.
When changing the administrator (admin) password please make a note of it in safe place.
If you forgot your password contact your distributor, proof of purchase is required.
A mouse is included. In case you need to replace it, it is highly recommended to choose a well-known brand, such as
DELL, MICROSOFT, LOGITECH, or SAMSUNG.
To Next Page
Loading...
