Digital Watchdog VMax Flex H.264 - Freeze Mode; Call Monitor Operation

21 | Chapter 1 : DVR User’s Manual
2.3 Freeze Mode
Click the right button on the mouse when viewing a live image and select the [FREEZE] option on the pop-up menu. In the Freeze
mode, the image pauses; the date/ time information does not; and the system clock continues running. Press [FREEZE] to pause
the live view. To resume the live view, press [FREEZE] again, or click the right button on the mouse and select the [FREEZE] option.
2.4 Call Monitor Operation
Click the right button on the mouse and select the [CALL MONITOR] option in order to enter Call Monitor Control mode. The
numeric panel will pop up at the center of the screen.
Click the specific channel button on the numeric panel to display full screen mode out of assigned spot out channels.
 Press the [CLOSE] button on the bottom of the numeric panel to go back to the previously programmed Spot Monitor mode.