29 | Chapter 1 : DVR User’s Manual
2.9.2 First Data
Go to the first screen of the recorded videos. This is the oldest recorded video.
2.9.3 Last Data
Go to the last screen of the recorded video. This is the most recent recorded video.
2.9.4 Event Log
The Event Log Search finds particular events, quickly and easily.
Click button to playback the selected event data.
Copy the event list to a USB memory device in text file format. Insert the USB Memory Stick into the USB Port. Press [SCAN] button
to detect the USB stick and then press [EXPORT] to copy the log information to the media.
To see a particular event, click the arrow buttons on the Remote Controller to the desired time range.
The following are the categories indicated on the Event Viewer.
1. Alarm by Sensor
2. Alarm by Motion
3. Alarm by Video Loss
4. Alarm by HDD Full
If the Alarm does not activate even after the alarm input setting has been made, check the alarm
connection port of the DVR rear panel.
To Next Page
Loading...
