49 | Chapter 1 : DVR User’s Manual
3.3 Record
Configure various record settings such as Continuous, Event, and Panic for each individual camera channel in the Record Setup
Menu. Network Stream settings are configured independently from the record settings in this menu as well. Therefore, the user can
optimize the bandwidth used by configuring the resolution, FPS, and image quality separately.
There are four sub menus in the RECORD menu—Record Setup, Panic Record, Schedule, and Holiday.
3.3.1 Record Setup
Configure record settings such as Resolution, FPS, Quality, Pre/Post Alarm, and Record Type for Normal Recording (Continuous) and
Event Recording (Alarm or Motion). Configure for each channel or use the [COPY SETTINGS] button to apply the same settings to all
cameras.
First, select the Record Mode for each camera channel.
Mode “C” (Continuous) disables Event Recording, and the DVR uses the settings for Continuous Recording.
[Continuous Record Setting]
To Next Page
Loading...
