19 | Chapter 1 : DVR User’s Manual
2.2.3 Toolbar
Move the mouse cursor to the bottom of the screen monitor during live mode and the menu bar will appear instantly, as shown
below.
Instant (Emergency) Recording is useful to start recording when the user notices an unusual activity. In emergency
recording, the system follows the [Panic Record] settings. The default settings for panic record is 30 (25) fps @ CIF Resolution for
all channels. If you want to change the panic record settings for each channel, go to [RECORD > PANIC RECORD].
Click the Button to activate PTZ control. User can adjust the pan/tilt/zoom by moving the mouse pointer.
Click the Button to playback the most recent video clip automatically.
Display of the HDD usage. If it displays 60%, 60% of the HDD space has been used for recording.
If there are no colored icon displayed on the top right corner of the live screen mode, the DVR is not recording any
video. In this case, you need to check [RECORDING SCHEDULE] or [CAMERA] of the main setup menu.
To Next Page
Loading...
