User’s Manual | 34
To set a screensaver on the DVR, go to the menu [SYSTEM > SYSTEM INFO] and click [SCREEN SAVER] to get the Screen Saver
window as shown below. Users can select [CRT] and/or [VGA] by checking the boxes. Users can set the WAITING TIME for when
the monitor will automatically turn off.
WAITING TIME: Users can select the WAITING TIME from NONE,1,2,3,4,5,6,7,8,9,10,20,30,40,50, and up to 60 MIN.
The screen saver will not work when either WAITING TIME is set to “NONE” or both SPOT and VGA checkbox are
unchecked. Screen saver may not work, during system upgrade, HDD format, or data backup process. The system
continues to record while the monitor is turned off.
When it comes to the [AUTO LOGOFF] setting, refer to the USER setting.
To Next Page
Loading...
