User Manual | 12
1.5 Rear Panel
Dimensions of 8 & 16 channels DVR Case 11.80” W x 2.16” H x 12.46” D
No. Name Description
1 Video-In Camera inputs (Supports NTSC/PAL)
2 Audio-In Audio Input Device (with Amplifier)
3 Audio-Out Audio Output Device (with Amplifier)
4 Video-Out Main Composite Monitor Output
5 Spot-Out Spot Composite Monitor Output
6 RS-232 Port RS-232 Input Device (POS)
7 USB Port USB Port (Ver 2.0) for Mouse Operation, Backup Device, or Firmware Update
8 VGA Port VGA Monitor
9 LAN Port 100Mbps RJ45 Ethernet Connection Terminal
10 Power Input Power Connection for 12 vDC at 6.67Amps Power Supply
11 Sensor Input Sensor Input
12 Alarm Output Alarm Output
13 RS-485 Port PTZ Dome Camera or External Keyboard Controller connection
14 Loop Out Loop Out Port
15 MIC-In MIC input device
16 HDMI Port HDMI Output
1.5.1 Video-In
To connect the camera input to the corresponding channel marked on rear panel
1.5.2 Audio-In
To connect audio input
1.5.3 Audio-Out
To connect audio output
NOTE
Carefully check whether the specifications of the peripheral devices match the DVR’s specifications.
NOTE
Camera input voltage level is 1Vp-p±10%.
To Next Page
Loading...
