15 | Chapter 1 : DVR User Manual
1.6 IR Remote Controller
The IR remote control allows the use to operate the DVR without having to use the mouse or the front panel buttons.
To use IR Remote Controller, the ID of the IR Remote Controller must be same as the ID of the DVR.
Default ID # for DVR and IR Remote Controller is “1”.
If you have more than one DVR, you can use one IR remote to control each DVR by setting a unique ID for each DVR.
No. Functions
1 Instant (Emergency) Recording Button
2 Numeric Button
3 Auto-Sequence Button on Live Display Mode
4 Freeze Button
5 Call Monitor Button
6 Channel Selection Button
7 Instant (Emergency) Playback Button
8 Search Button
9 OK (Select) Button
10 Audio Mute Button
11
Playback Button on Search Mode
(Fast Backward/Playback/Stop/Fast Forward)
12 Exit Button
13 Display Mode Button
14 Zoom Button
15 PIP Mode Button
16 Bookmark Button
17 Zoom In & Out Button
18 Backup Button
19 PTZ Button
20 Direction Button (Up/Down/Right/Left)
21 Menu Button
22 ID Select Button (DVR1 ~ DVR8)
To Next Page
Loading...
