User Manual | 20
2.2.3 Toolbar
Move the mouse cursor to the bottom of the screen monitor during live mode and the menu bar will appear instantly, as shown
below.
Instant Emergency Recording, which is useful to start recording when the user notices an unusual activity. In emergency
recording, the system follows the [Panic Record] settings. The default settings for panic record is 30(25)fps @ CIF Resolution for
all channels. If you want to change the panic record settings for each channel, please go to [RECORD Æ Panic Record].
To activated PTZ control, user can adjust the pan/tilt/zoom by moving the mouse pointer, like a virtual joystick.
Click the button to playback the most recent video clip automatically.
Display of the HDD usage. If it shows 60%, 60% of the HDD space has been used for recording.
NOTE
If you do not see any colored icon on the top right corner of the live screen mode; then, it means that the system is not
recording any image. In this case, you need to check the [Recording Schedule] or [Camera] of the main setup menu.
Or the Display can turned OFF in the display system setup
To Next Page
Loading...
