User Manual | 40
Remote ID:
The Remote ID should match the ID of the IR Remote Controller in order for the remote to function.
Keyboard ID:
The Keyboard ID should match the selected DVR on the keyboard. In addition, the baud rate and Keyboard
should match the selected keyboard controller.
Upgrade:
Users can easily upgrade the DVR via DVD, CD, USB, or FTP Server.
PROCEDURE
How to upgrade system firmware by using USB memory stick
1) Insert the USB thumb-drive formatted by FAT32 in any USB port of DVR (compatible with USB 2.0).
2) Press the [SCAN] button and the brand or model name of the USB will display on the [DEVICE] field.
3) Click [OK] to confirm.
How to upgrade system firmware by using FTP server
1) Select FTP in the drop-down list and type the given FTP server IP address in the [HOST ADDRESS] field. There
is no default username and password. The FTP server address is subject to change without prior notice.
2) Click [CHECK] button. DVR will detect the latest Firmware version from the FTP server. If there is a new
firmware, DVR will ask if you want to upgrade it or not.
3) Click [OK] to confirm it and then click [START] to start upgrading.
To Next Page
Loading...
