User Manual | 42
3.1.2 User
“Admin” with no factory default password is always the main user of the DVR. Admin should change the password of the DVR for
extra security.
Admin can add new users with different permission levels in areas of Function, Menu Access, and Live & Playback.
[FUNCTION] consists of Search, PTZ, Backup, and Playback.
[MENU ACCESS] consists of System, Device, Record, Network, Backup, and Quick Setup.
[LIVE & PLAYBACK] consists of the different camera channels.
The DVR can be set so user does not lock or require login.
If user checks [ON BOOT], DVR will not ask for an ID and Password input when the system reboots.
If user sets a time for [AUTO LOGOUT], the DVR will automatically go to the live display mode. To control the DVR again, user
has to input the ID and Password.
NOTE
Each DVR can have up to 9 users, including the Administrator.
To Next Page
Loading...
