59 | Chapter 1 : DVR User Manual
x UPnP (Universal Plug and Play): UPnP stands for Universal Plug and Play, which indicates a universal protocol for
widespread plug-and-play devices to ease the network implementation. When the PC and DVR has the UPnP installed, the
PC automatically begins to recognize the DVR in the same local area network. This way PC can directly connect to the DVR
by clicking on the icon representing the DVR in [My Network Places] folder. The first five characters of the detected DVR
filename is the firmware version.
Double click on the desired icon. The icon will open an internet explorer browser that connects to the DVR as shown below.
Please type in your User ID and Password and click [LOGIN] button. To connect to the DVR, click [CONNECT] button.
Default Login is “
admin” and the password box blank.
To Next Page
Loading...
