User Manual | 62
3.4.3 Notification
x Remote Notify: The system can notify an alarm message to the IP address of ACS (Advanced Client Software) over the
network.
Choose from a selection of different kinds of alarms by pressing [ADD] button. Sensor, Motion Detection, Disk Full, Admin
PW Changed, Video Loss, and Power On/Off. generate alarms
x E-Mail Notify: The system can send notification to an Email address, Advanced Client Software, or Central Management
Software over the network.
Choose from a selection of different kinds of alarms by pressing [ADD] button. Sensor, Motion Detection, Disk Full, Admin
PW Changed, Video Loss, and Power On/Off. Can generate alarms by checking [USE TLS], users can use a public email
address such as Yahoo, Google, Hotmail accounts. Type DVR name in the [DVR Name] box. The DVR Name will appear in
the email so that users can recognize which DVR sent the e-mail.
NOTE
Configuration’s first priority is always given to [RECORD SETUP] of the [RECORD] menu. Thus, [RECORD SETUP] needs
to be set, for the system to send alarm message or email notifications.
If user sets “Continuous” for [SCHEDULE] of the [RECORD] menu and checks the [ALL] box in [NOTIFCATION], e system
will not send alarm messages. [SCHEDULE] has to be set as “C+M”, “M+S”, or C+M+S”, for [NOTIFICAION] to work
properly.
To Next Page
Loading...
