Need help?Do you have a question about the DigiTech BASS DRIVER and is the answer not in the manual?
Power| power supply | 9V Alkaline Dry Battery |
|---|---|
| power consumption | 4.8 Watts |
| battery life | Approximately 4 hours |
Impedance| input impedance | 1 MOhms |
|---|---|
| output impedance | 100 Ohms |
| optional power supply | PS200R - 100 (100V ~ 50/60Hz), PS200R - 120 (120V ~ 60Hz), PS200R - 230 (230V ~ 50Hz), PS200R - 240 (240V ~ 50Hz) |
Weight and Dimensions| dimensions | 4 15/16”(L) x 3 1/8”(W) x 2 1/8”(H) |
|---|---|
| weight | 1.38 lbs |
Essential safety precautions for operating the DigiTech Bass Driver pedal.
Adjusts the effect's output volume level.
Controls the boost or cut of high frequencies for tone shaping.
Manages the mix between dry and distorted signal for bottom end.
Selects between three distinct overdrive and distortion sound types.
To Next Page