DigiTech BASS MULTI CHORUS User Manual

8. Pedal
Press the pedal to turn the effect on and off.
9. Out 1(Mono) Jack
Connect this output to a single bass amplifier or mixer channel panned
to the center for mono operation.
10. Indicator LED
This LED indicates when the effect is turned on. If the LED becomes
dim or does not light when the cables are connected, the battery needs
to be replaced.
11. Out 2 Jack
Connect this output to a second amplifier or mixer channel for true
stereo chorusing. Stereo is the best way to get the most effective
chorusing experience from the Bass Multi Chorus pedal.
Bass Multi Chorus Manual 8/20/02 10:43 AM Page 7

DigiTech BASS MULTI CHORUS Specifications

General

Brand	DigiTech
Model	BASS MULTI CHORUS
Category	Music Pedal
Language	English