DigiTech BASS SYNTH WAH User Manual

CIT™ Cabinet Modeling
The Bass Synth Wah also has built-in CIT™ cabinet modeling that
can be enabled. CIT cabinet modeling simulates a 4x10 bass speaker
cabinet, giving you a through-an-amp sound when running direct to a
mixer or recording device.
To Enable CIT™ Cabinet Modeling
1. Press and hold the Pedal down.
2.Apply power by either connecting a 1/4” instrument cable to the
Bass Synth Wah Input or connect the PS200R power supply to
the AC Adapter Jack.
CIT cabinet modeling has to be turned on each time you apply
power to the Bass Synth Wah.

DigiTech BASS SYNTH WAH Specifications

Power

power supply	9V Alkaline Dry Battery
power consumption	4.8 Watts
optional power supply	PS200R - 100 (100V ~ 50/60Hz), 120 (120V ~ 60Hz), 230 (230V ~ 50Hz), 240 (240V ~ 50Hz)

Electrical Specifications

input impedance	1 MOhms
output impedance	100 Ohms
battery life	Approximately 4 hours (with continuous usage)

Weight and Dimensions

dimensions	4 15/16” (L) x 3 1/8” (W) x 2 1/8” (H)
weight	1.38 lbs