Exit tuner mode by pressing either Footswitch. The tuning reference is retained when the
unit is turned off.
Bypass
The BP80 presets can be bypassed for a clean,unprocessed bass tone. To bypass the BP80,
press both footswitches simultaneously. The display reads By indicating the preset is
bypassed. Press either footswitch to exit Bypass and return the the last selected preset.
Editing/Creating Presets
Creating your own signature sound with the BP80 is easy and intuitive. The BP80 lets you create
your own presets, or fine tune existing Presets to suit your needs. When creating or editing a
sound,you must start with a User or Factory Preset. It is not possible to start with an empty
preset. You can save your preset to any User Preset location while storing the preset (see
Storing a Preset on page 13).
To edit or create a Preset:
1.Press the FOOTSWITCHES to select a preset
2.Press the EDIT buttons in conjunction with the Effect LEDs to choose the effect you want
to edit.
3.Press the VALUE Buttons to change the parameter values.
11
To Next Page
Loading...
Need help?
General
