Other Functions
Expression Pedal
The Expression Pedal on the BP80 can be assigned to control the Volume,Wah,Whammy™,
or one of several other parameters in real time. When a parameter has been assigned to
the Expression Pedal, a programmable minimum and maximum value can also be assigned.
The procedure for assigning a parameter to the Expression Pedal is as follows:
1.Press the Right Edit/Effect button until the Expression LED flashes. An effect LED will also
light indicating which effect the expression pedal is currently assigned to.
2.Press either one of the Value/Master Volume buttons until your desired effect’s LED is lit.
The Expression LED will continue to flash during your selection and the Display will show
a two-digit character value to describe the effect parameter that the expression pedal is
assigned to. Your choices include:
No Assignment --
Volume OL (Output Level)
Wah AH (Expression Pedal acts as a Wah pedal)
Amp GA (Expression Pedal controls the Amp Gain)
Chorus SP (Speed), LE (Level)
Flanger SP (Speed), LE (Level)
Phaser SP (Speed), LE (Level)
Vibrato SP (Speed),dP (Depth)
SynthTalk sS (Sensitivity)
21
To Next Page
Loading...
Need help?
General
