Drum Machine
The BP80 includes several sampled drum patterns that are useful for developing a good
sense of timing. Press the Drums button to start playback of the drum machine (except
when in Store or Bypass mode). The Edit buttons select the drum Pattern, Tempo, and
Level of the drum loop. Press the Drums button again to stop playback of the drum
machine.
Factory Reset
This function resets the BP80 to its original factory settings.This procedure erases all
custom user presets. Performing this function erases all user-programmed data.
All such data will be lost forever!
The procedure for performing a Factory Reset is as follows:
1.Disconnect the power supply from the BP80 (AC Power) or unplug the bass guitar from
the input jack (battery power).
2.Press and hold the left EDIT button while re-connecting the power or plugging your bass
guitar into the BP80’s input.
3.When the display reads --,release the button and press the STORE button. The display
reads rE. The BP80 is now restored to its factory settings.
y1-y9 – 2x15 Cabinet
c1-c9 – 4x10H Cabinet
d1-d9 – 2x15 Cabinet
f1-f9 – 2x15 Cabinet
G1-G9 – 2x15 Cabinet
P1-P9 – 2x15 Cabinet
L1-L9 – 2x15 Cabinet
n1-n9 – 2x15 Cabinet
24
To Next Page
Loading...
Need help?
General
