Octavider LE (Level)
Envelope ES (Sensitivity)
Detune LE (Level)
Pitch Shift LE (Level)
Whammy hy (Shift)
Delay dL (Delay Level), DF (Delay Feedback - 99 = Infinite Repeat*)
Reverb rL (Reverb Level)
3.To adjust the minimum value limit (heel down) and maximum value limit (toe down) do
the following:
A.Press the Right Edit/Effect button.The Display will flash between HE (heel) and the
value you have selected.
B.Select the your desired value by pressing either of the left or right Value/ Master
Volume buttons.
C.Press the Right Edit/Effect button once more and the Display will flash between the
to (toe), or maximum value position and the value you have selected.
D.Select your desired value by pressing either the left or right Value/Master Volume
buttons.
(The value range for each assignable parameter is 1-99)
4.Store your Expression Pedal assignment values to your Preset. See page 13 for more
information on the storing procedure.
*Infinite Repeat creates a playback loop of whatever signal was played into the delay.
22
To Next Page
Loading...
Need help?
General
