Tone controls, respectively. The DF-7
also features separate LOW, MID, and
MID FREQ controls giving you added
EQ flexibility so you can customize the
model to suit your taste.
Set the DF-7’s LOW, MID, MID
FREQ, HIGH, and GAIN knobs to
the 12 O’Clock position to accurately
reproduce this pedal model.
When this model is selected, the CIT
cabinet model used in Flexible
Output Modes 1 and 2 is based on
a Marshall
®
* 4x12 cabinet w/25 watt
Celestion
®
* Greenback
®
* speakers.
Flexible Output Mode
™
The DF-7 not only sounds great
plugged into a single amp or mixer
channel, there are also two additional
output modes that can be selected
during power up.These output modes
reconfigure the OUT 1 (AMP) and
OUT 2 (MIXER) outputs into
stereo outputs that can be plugged into
either two amps or into two channels
of a mixer or recording device. Using
either of these modes you can access
six distinctively different stereo
spectrums creating stereo imagery
from narrow to double wide.
To Next Page
Loading...
Need help?
General
