DigiTech Distortion Factory DF-7 - Front Panel Diagram and Controls

Feature Diagram
1. LEVEL
Controls the output level of the
effect.Turn this knob clockwise to
increase the output level, and
counter-clockwise to decrease the
output level.
2. LOW
Controls each MODEL’s low frequency
boost or cut.
3. MID FREQ
Adjusts each MODEL’s midrange
center frequency.The range is from
200Hz to 5kHz.
4. MID
Controls each MODEL’s midrange
frequency boost or cut.
5. Power Supply Jack
Connect only the DigiTech
®
PS200R