DigiTech iStomp

6
6. IN 2 Jack–Connectasecondinputtothisjackforstereooperationwhenstereo
pedalsareused.IN1andIN2arefedthroughtheeffectandthentoOUT1and
OUT2andwillkeeptruestereoseparationbetweenchannelswhenbothinputs
areused.Note: IN2isdisabledwhenamonoeffectisloaded,suchasdistortion
(taptheINFObuttontoseewhichpedalsdonotsupportIN2).
7. IN 1 (Mono) Jack –Whenonlyasingleinputisneeded,thisjackistobeused.
Signalswillbeheardatbothoutputsregardlessiftheeffectisonandoff.Pedalsthat
onlyrequireasingleinput(compressors,overdrives,distortions,etc…)shouldonly
useIN1(Mono)sinceIN2isdisabledinthesepedals.
8. DSC Download Port– Thedownloadportisusedforprogrammingthepedal
fromyouriOSdeviceviatheincludedDSC-iOScable.
9. Footswitch–Pressthisfootswitchtoturntheeffectonandoff.Ifadelaypedalis
loadedintotheiStomphardware,thisfootswitchcanalsobeusedtosetthedelay
timebyenablingtheTapTempofunction(seepage13“DelayTapTempo”formore
informationonTapTempo).