To Next PageTo Next Page
Need help?Do you have a question about the DigiTech 2112 and is the answer not in the manual?
General| Type | Multi-Effects Processor |
|---|---|
| Technology | Digital |
| Effects | Chorus, Delay, Distortion, EQ, Flanger, Phaser, Reverb |
| Display | LCD |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 2 x 1/4" |
| EQ | 3-band |
| Programmability | Yes |
General warnings regarding electrical hazards, risk of shock, and not opening the unit.
Specific safety warning for UK mains plugs and fuse replacements.
Cautionary notes regarding lithium battery replacement and disposal.
Instructions for connecting guitar, foot controller, MIDI, and AC power.
Connecting external effects and setting input/output levels.
How to navigate and select programs using the wheel.
Details of the main display and its various sections.
Description of primary controls for sound and program selection.
Explanation of buttons like Program, FX Edit, Utility, Store.
Buttons for direct access to Preamp, Mod, Pitch, Delay/Reverb, Other.
Buttons for Solo boost, tuner access, and delay tempo setting.
Connection for power and access to the fuse.
Ports for MIDI communication with other devices.
Connections for the Control One foot controller and expression pedals.
Connections for external effects and audio output signals.
Details on compression, distortion paths, EQ, wah, noise reduction, and cab emulation.
Overview of digital effects, DSP, seamless changes, and real-time modifiers.
Explanation of the Solo button's function and usage.
Input/output, FX loop, signal flow chart, and basic specs.
Information on integrating the Control One foot controller.
Understanding the hierarchy of programs, modules, and defaults.
Explanation of different signal processing paths for modules.
Details on module sizes and their impact on DSP usage.
Diagram and explanation for connecting to a stereo power amp.
Wiring diagram and explanation for stereo combo amp setups.
Advice on signal management for optimal sound with combo amps.
Instructions for activating and configuring the cabinet emulator.
Routing outputs for direct connection to a mixer.
How front panel buttons indicate active or inactive functions.
Explanation of Program, FX Edit, Utilities, Levels, and Assign modes.
Step-by-step guide to selecting programs from Factory or User banks.
Setting signal levels and adjusting preamp gain for desired tone.
Shaping tone with EQ, controlling effect mix, and overall program volume.
Procedure to save modified programs and select storage location.
Swapping effect modules and selecting default settings.
Procedure to save modified effect module settings as a new default.
Entering FX Edit mode to access and modify module parameters.
Explanation of Threshold, Ratio, Attack, and Output Level controls.
Controls for Noise Reduction: Type, Threshold, Attn, Attack, Release.
How delay works, tap tempo, and core delay parameters.
Setting delay duration, repeats, and feedback amount.
Controls for Noise Gate: Level, Thresholds, Attack, Hold, Release.
Details on MIDI CC, LFO, Dynamic modifiers, and external pedals.
Step-by-step process for assigning modifiers to parameters.
Configuring MIDI receive and transmit channels.
Procedures for backing up and transferring data via SysEx.
Procedures for resetting the unit to factory defaults.
Physical connection instructions for the Control One foot controller.
Linking specific programs to footswitches for quick recall.
Linking parameters to footswitches or expression pedals for real-time control.
Procedures for resetting the device and factory settings.
