55
•Turn the <4> knob to select the gain parameter, then
Press the <Assign> button once.The display reads:
• Select the footswitch or move the expression pedal to
be used.An example would be to use Exp 1. From
there, use knobs <3> and <4> to set the minimum and
maximum ranges of the gain. Once this is done, the dis-
play will appear something like this:
• To exit the parameter assignment mode press the
<Program> button to return to Program mode.The
<Store> button will stay bright until these changes are
stored, or the program is changed.
To Next Page
Loading...
