56
OTHER FOOTSWITCH FUNCTIONS
The footswitches on the Control One can be assigned to
do several functions.This is done through the Foot
Controller menus in the Utilities section of the 2112.
These functions include:
To ggle MIDI CC: This function allows you to send
MIDI Continuous Controller (CC) information out
the MIDI port while the footswitch still maintains its
ability to control a Parameter directly.When assigned
to a footswitch, CC values 0 or 127 are sent. CC
numbers 0 through 127 are available.
Int. Exp pedal CC: The Expression pedal of the
Control One can also send MIDI CC data to other
MIDI devices.
The procedure for setting up a MIDI CC toggle
footswitch function is as follows:
• Press the <Utilities> button once.The display reads:
•
T
urn the <Page> knob until the display r
eads:
• Turn the <2> knob to select the bank in which the CC
toggle is to used. Once the bank is selected, use the
<3> knob to select the footswitch to be used.The dis-
play reads:
• The display now shows that footswitch 6 in bank 1 is
set to toggle CCs.Take notice that (from the factory)
when footswitches 6-0 are selected, you can assign that
footswitch a CC number from 0-127 by turning the
<4> knob.
• Now to assign the CC number, just turn the function
knob <4> until you have reached the desired CC.The
display will now read something like this:
• Press <Utilities> to exit the Foot Controller setup
menu.
ASSIGNING MIDI CONTROL TO THE
EXPRESSION
PEDALS
This series of menus and submenus allows MIDI setup of
the Expression pedal(s) of the Control One.There are
two procedures you must do in order for the Expression
pedals to work properly with MIDI:
1.Assign CC Number
2. CC Transmit Channel
Assign CC Number to Expression Pedals - This
option allows you to choose the MIDI CC numbers
you want to use for sending continuous control mes-
sages using any one of the three Expression pedals
options. From the factory, the Expression pedal(s) are
not pre-assigned to any MIDI CC number.To assign
which CC number is sent from the Expression pedal(s),
do the following.
• Press the <Utilities> button once.The display reads
something like this:
•
T
urn the <Page> knob until the displa
y reads:
To Next Page
Loading...
Need help?
General
