CHANGING EFFECT MODULES
Each program can be comprised of up to eight digital
effects (in addition to the Preamp section).You can scroll
through the modules in each program two different ways:
1. By pressing the <Edit> button to enter FX Edit
mode and using the <Program/Effect> wheel to
scroll through the different modules, or
2. By using the FX Library buttons. Pressing the
<Preamp> button takes you directly to the first
module in the preamp section. Subsequent pushes
will scroll you through the successive modules in
the preamp section. Likewise, pushing the
<Dly/Rvb> button takes you directly to the first
module in the Digital FX section which has a delay
or reverb loaded in it. Subsequent pushes of the
button scrolls you through subsequent modules
that are loaded with a delay or reverb (assuming
there are more delays or reverbs loaded in the
program of course.)
Once you reach a module you want to change (ie: you
want to swap a delay for a reverb), use the <2> knob to
select a new effect.
SELECTING A DEFAULT
Once you have selected the effect you want in the pro-
gram (ie: StDual Reverb), you can quickly scroll through
several different StDual Reverb defaults stored in your
2112's library.
EXAMPLE:
There are 7 Stereo Pitch Shifter defaults to choose
from. Some Factory Programs use these Default set-
tings. So, if you like the Pitch shifter that is being used
in Factory Program #4, and would like to use it in
Program #98, simply scroll to the Stereo Pitch Shifter
module, then use the <4> knob to recall the default
(which happens to be F4-Octave Up) in Program #4.
This eliminates the need to copy all those parame-
ters from one location to the other.
For a list of all the FX Modules and their Defaults, see
page 23-27.
ADJUSTING THE MODULE’S LEVEL
Once in Edit Mode, the parameters of every default mod-
ule can be accessed through a series of pages.You adjust
the level of a particular module from Edit page 2. If you’re
not already in Edit Mode, press the <Edit> button.You
can then use the <Program/Effect> wheel to scroll to the
module you want to change (ie: St Pitch). Using the
<Page> knob, scroll to page 2. You can now change the
individual module’s level using the <1> knob. Settings
range from 0 (off) to 100%.
CUSTOM DEFAULTS
Once you have tweaked the parameters of an effect
Module, you can store it off as part of the program. Once
it is stored off, it becomes a custom default for that pro-
gram, but is not added to the User default library.To save
the settings as User Defaults, please see pg. 21
19
EDITING A
PROGRAM
It is extremely easy to create custom Effect Programs because your 2112 gives you access to a complete library of pro-
fessionally developed default effects (“Defaults”).
• From Pr
ogram mode
,
press the <Pitch> button.
The displa
y looks something lik
e this:
When you enter FX Edit mode, the first page of every FX Module allows you to:
1) Bypass that effect module (by turning it on or off) using the <1> knob.
2) Select an Effect Module (Only in the Digital Effect section), using the <2> knob.
3) Store the Default using the <3> knob (for more info on storing Defaults, see pg. 21)
4) Select a Default for the selected Effect Module using the <4> knob.
To Next Page
Loading...
Need help?
General
