DigiTech 2112 User Manual

NAMING THE PROGRAM
• Using the <Program/Effect> wheel, change the charac-
ter to the one you want in the selected position.
• When the correct character is displayed in that posi-
tion, use the <Page> knob to scroll the cursor to the
next character you want to change.
• Use <1> knob to change the letter’s case.The <2>
knob is used to select numbers,The <3> knob is used
to insert spaces.The <4> knob is used to copy and
paste characters.
• To copy a character, position the cursor under the char-
acter you want to copy (using the <Page> knob), then
turn the <4> knob clockwise.To paste the copied char-
acter, position the cursor where you want to paste the
character, then turn the <4> knob counter-clockwise.
• To abort the procedure, push either the <Program>
button to take you to Program Mode, the <Edit> but-
ton to take you to FX Edit Mode, or the <Utilities>
button to take you to Utility Mode, depending upon
which mode you want to enter.
STORING THE PROGRAM
• When you have the name how you want it, press the
<Store> button again.The top line of the display reads:
Store To: [Program Name]
This screen allows you to select the location of the new
Program. Note that when the Program is stored, it is
stored in the User bank of Programs because Factory
Programs cannot be overwritten.
• Use the <2> knob or the Program/Effect wheel to
select the Program number where you want to store
the new Program.
• Press <Store> again.The top line of the display briefly
reads:
STORING PROGRAM TO ##
after which you are taken to the Program you just
stored.
The newly created Program is now loaded, and can now
be recalled at any time.
• To abort the procedure, push either the <Program>
button to take you to Program Mode, the <Edit> but-
ton to take you to FX Edit Mode, or the <Utilities>
button to take you to Utility Mode, depending upon
which mode you want to enter.
18
STORING/NAMING PROGRAMS
Before we get into editing programs and creating your own, let’s learn how to store changes so you won’t lose any
modifications you’ll want to keep.The Store procedure allows you to rename, relocate and save any modifications you
have made to Programs so that they can be accessed easily later.
• Press the <Store> button once.The display shows the current Program name (which may look something like this):
A cursor appears under the first character of the Program name
Name: Clean Comp Delay
2
USER
%kHz
msdB
CAP
1
CHANGEDLINK
 nbr
2
CHANGEDLINK
%kHz
msdB
InS
3
CHANGEDLINK
%kHz
msdB
COp
4
CHANGEDLINK
PAGE
1
OF 1
COMP WAH TUBE EQ
L/R OUTS
DIGITAL


GATE
SEAMLESS
BANK

DigiTech 2112 Specifications

General

Brand	DigiTech
Model	2112
Category	Music Pedal
Language	English