54
ASSIGNING
PROGRAMS TO
FOOTSWITCHES
To assign any currently selected Program to a Patch
footswitch in the currently selected bank, do the follow-
ing:
• Be sure that that the Program's Title screen is displayed
as shown below:
• Press the <Assign> button once.The display reads:
• Press one of the ten footswitches to Link that Program
to that switch. If you choose a footswitch that is already
assigned to do something else besides select a Program,
the display reads:
• Turning the <3> function button re-assigns the function
of the footswitch while turning <4> will leave everything
as it was, aborting the procedure.
Once you link a Program to a Patch in a Bank, the LED
lights above the footswitch that you selected indicating
the Link was successful.
• Press the <Program> button to exit.
ASSIGNING PARAMETERS TO FOOTSWITCHES/
E
XPRESSION PEDALS
The 2112 allows you to control up to 16 Parameters per
Program. Each time you link a parameter to a Footswitch
or expression pedal, it is added to any assignments
already made to that controller.This is where the 2112
becomes the dedicated work horse that it is, by doing all
of the organizing for you so all you have to do is select
which parameter is being controlled, then tell the 2112 to
“Make it so”
To assign any currently selected Parameter to a
footswitch or Expression pedal in the
currently selected bank, do the following:
• Be sure that the Parameter you want to link is displayed
and selected (below is an example the gain setting of
the Tube Distortion module.).The display should appear
something like this:
A
SSIGNING FUNCTIONS
The Control One helps you organize your sounds into 19 groups called Banks. Each of these Banks utilize the 10
footswitches patches, which are user programmable to do one of several functions.These functions include:
• Selecting any 2112 Program
• Modifying or turning On/Off any Parameter in real-time
• Sending MIDI CC information out of the MIDI out port (Toggle CC# for values 0 or 127)
• Assign a MIDI CC# for the Expression pedal to send out the MIDI port
• Selecting the next or previous Bank (Bank Up/Down)
To change Banks, Press either the Bank Up or Bank Down footswitches on the Control One to take you up or down
one bank at a time.
The Foot Controller setup menu contains all the setup options necessary to use the 2112 with the optional DigiTech
Control One foot controller.The submenus included under the Foot Controller setup are located on pages 10 and 11
of the utilities menu and they include:
• Patch Assignment
• Continuous Control
The 2112 includes several shortcuts for programming your Control One:
To Next Page
Loading...
Need help?
General
