46
(6 octaves down), to 24 (2 octaves up).
Min Detune This parameter sets the minimum pedal level of detune effect. Ranges from: -50% (down 50
cents), to 50% (up 50 cents).
Max Detune This parameter sets the maximum pedal level of detune effect. Ranges from: -50% (down 50
cents), to 50% (up 50 cents).
Pedal This parameter is used for the assignment of an expression pedal.This parameter also
shows the pedal travel range. Ranges from: 0 to 100
Out This parameter is used to set the overall output level of the Whammy module. Ranges
from: 0 to 100%
Pan This parameter is used for for the position of the Whammy effect in the Stereo soundfield.
Ranges from: Left 99 to Right 99.
AUTO W
AH
Break out the Bell-bottom jeans and the Disco mirror balls, because the Auto-Wah is here to play.The Auto Wah is a
great effect use when you want nasally wah-type effect but you don’t want to do the leg work.The Auto Wah utilizes a
sensitivity detector that reads the input signal, then simulates the action of a wah pedal.This is great for producing
New Bohemian type sounds.
AUTO WAH EFFECT PARAMETERS
Auto Wah On/Off Turns the Auto Wah module on or off. When the module is turned off, the signal will con-
tinue to pass through the module.
FX Level This parameter lets you select the overall FX level mix of the Auto Wah Effect module.
Ranges from: Off to 100%.
Sensitivity This parameter adjusts the sensitivity of the detection of the automatic wah.The higher the
sensitivity is set, the wider the Wah range is. Ranges from: Off to 100%.
To Next Page
Loading...
Need help?
General
