DigiTech JamMan Express XT User Manual

3
Connectors
4. Power Jack
Connect an optional PS0913DC power
supply to this jack�
5. JAMSYNC OUT
Connect this jack to the JAMSYNC IN
jack on another JAMSYNC compatible
device for master control over loop
playback and stop functions�
6. JAMSYNC IN
Connect this jack to the JAMSYNC
OUT jack on another JAMSYNC
compatible device to slave loop
playback and stop functions to a master
device�
7. LEFT IN (Mono)
Connect your instrument or additional
pedal to this jack� The signal is fed to
both outputs when only the LEFT IN
(Mono) jack is used�
8. RIGHT IN
Connect a second input to this jack
for stereo operation� LEFT and RIGHT
inputs are processed separately through
the looper engine and then fed to the
LEFT and RIGHT outputs to maintain
true stereo separation between
channels�
9. LEFT OUT (Mono)
Connect this output to the input of a
single guitar amplifier or another pedal
input�
10. RIGHT OUT
Connect this output to the input of a
second guitar amplifier when a second
amp is being used�
1
3
2
4 5
6
9
10
8
7
1
3
2
4 5
6
9
10
8
7
1
3
2
4 5
6
9
10
8
7

DigiTech JamMan Express XT Specifications

General

Brand	DigiTech
Model	JamMan Express XT
Category	Music Pedal
Language	English