Need help?Do you have a question about the DigiTech JamMan SOLO XT and is the answer not in the manual?
General| Sampling Rate | 44.1 kHz |
|---|---|
| A/D/A Conversion | 24-bit |
| Type | Looper Pedal |
| Storage | Internal, SD Card (optional) |
| Inputs | 1 x 1/4" (instrument), 1 x 1/8" (aux in) |
| Outputs | 1 x 1/4" (mono) |
| USB | 1 x Mini-B |
| Power Supply | 9V DC power supply |
General precautions for safe operation, including handling, cleaning, and electrical safety measures.
Explanation of international electrical hazard symbols and warnings against user servicing.
Defines the scope of DigiTech's limited warranty, including repair/replacement and exclusions.
Detailed list of the JamMan Solo XT's technical features and capabilities.
Details the functions of the Pedal Switch for recording, playback, overdubbing, and tempo tapping.
Details the LED Display for information and the Up/Down buttons for selection.
Details on JamSync OUT and IN jacks for master/slave device synchronization.
Description of the memory expansion slot for Micro SD/SDHC cards.
Diagram illustrating connection of the JamMan Solo XT to an amplifier's input.
Diagram for connecting a master and a slave JamMan Solo XT for single-player looping.
Diagram illustrating JamSync connection for multiple JamMan Solo XT devices.
Step-by-step guide to connect, select a memory location, and record a loop.
Instructions for playing back a loop and recording an overdub.
Procedure for saving the recorded loop to memory.
Instructions for recording a loop using the free-form method.
Step-by-step instructions for recording a loop using the Auto Record function.
Instructions for recording a loop using the Auto Quantize method.
Instructions for recording a loop using Auto Quantize with Pedal Tempo.
Detailed steps for performing an overdub recording on a loop.
Step-by-step guide on how to use Undo, Redo, and Clear functions on loops.
Instructions on how to use the Tempo option or Tempo button for time stretching.
Procedure for storing recorded loops, overdubs, or attribute changes.
Introduction to JamSync for syncing multiple JamMan devices for multi-track looping.
Diagram and instructions for connecting master and slave JamMan Solo XT devices.
Description of two methods for recording loops across synced JamMan Solo XTs.
Guide to setting up multiple JamMan Solo XTs in a chain for JamSync operation.
Step-by-step guide to recording individual loops one at a time using JamSync.
Guide to recording loops sequentially across master and slave devices using JamSync.
Steps to arm slave devices and initiate playback on synced JamMan Solo XTs.
Instructions for changing the playback type between Loop and Single Phrase.
Guide to setting the loop tempo in BPMs before recording a new loop.
Instructions for setting the time signature (beats per measure) for new loops.
Explanation of how installing an SD/SDHC card expands loop memory capacity.
Step-by-step guide for installing and removing Micro SD/SDHC memory cards.
Procedure for formatting unrecognized memory cards to work with the unit.
Detailed steps to initiate and confirm memory card formatting.
Instructions for reformatting a Micro SD/SDHC card.
Overview of functions controlled by the optional FS3X footswitch: selection, tempo, play, stop, clear.
Procedure for setting up multiple loops for verse, chorus, and bridge playback.
Instructions for playing back verse, chorus, and bridge loops using the FS3X footswitch.
Step-by-step guide to restore the JamMan Solo XT to its original factory state.
To Next Page