DigiTech JamMan SOLO XT User Manual

40
Setup
The JamMan Solo XT’s Setup menu allows you to configure global functions and edit
loop attributes. The following section will describe each of these Setup menu items in
further detail. To enter Setup Mode, press the <SETUP> button. The SETUP button’s
LED will flash when in Setup Mode. Pressing the <SETUP> button repeatedly will
allow you to navigate the Setup menu. The available Setup menu items are:
MENU ITEM DESCRIPTION OPTIONS ITEM TYPE
LoP, Sin
Playback Type Loop, Single Phrase Loop Attribute
tPO
Tempo 40-240 Loop Attribute
Sig
Time Signature 2-15 Loop Attribute
rHy
Rhythm Type Off-9 Loop Attribute
stP
Stop Mode Fade, Finish, Instant Loop Attribute
rSE
Reverse On/Off Loop Attribute
Arc
Auto Record On/Off Global Function
PdL
Pedal Tempo On/Off Global Function
rdP, rPd
Record Sequence
Record » Dub » Play,
Record » Play » Dub
Global Function
To exit the Setup menu at any time, press the
<PEDAL SWITCH>.

DigiTech JamMan SOLO XT Specifications

General

Sampling Rate	44.1 kHz
A/D/A Conversion	24-bit
Type	Looper Pedal
Storage	Internal, SD Card (optional)
Inputs	1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs	1 x 1/4" (mono)
USB	1 x Mini-B
Power Supply	9V DC power supply