DigiTech JamMan SOLO XT User Manual

50
Pedal Tempo
The Pedal Tempo feature is off by default. This feature provides tap tempo using the
PEDAL SWITCH. This allows you to set the tempo of a loop hands-free, before you
begin recording.
To turn Pedal Tempo on or off:
1. Press the <SETUP> button eight
times or until PdL appears in the
display.
2. Press the <UP/DOWN> buttons to
turn Pedal Tempo on and off.
3. Once the desired selection has been
made, press the <PEDAL SWITCH>
to exit the Setup menu.
NOTE: The Pedal Tempo parameter is a global parameter, so storing is not necessary. Pedal Tempo is
only available when recording new loops and is only active after selecting an empty memory location.
For information on using the Pedal Tempo feature, see “Operation > Recording a Loop Using Pedal
Tempo (Auto Quantize)”.

DigiTech JamMan SOLO XT Specifications

General

Sampling Rate	44.1 kHz
A/D/A Conversion	24-bit
Type	Looper Pedal
Storage	Internal, SD Card (optional)
Inputs	1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs	1 x 1/4" (mono)
USB	1 x Mini-B
Power Supply	9V DC power supply