47
Stop Modes
The JamMan Solo XT has 3 different loop Stop Modes to choose from, they are: Fade,
Finish, and Instant. The below table describes each of these Stop Mode options.
OPTION STOP MODE DESCRIPTION
FAd
Fade Performs a 10 second fade out then stops.
Fin
Finish Finishes playing the loop in its entirety then stops.
InS
Instant Loop stops playing instantly.
To change the Stop Mode of a loop:
1. Select the desired memory location
using the <UP/DOWN> buttons.
2. Press the <SETUP> button five times
or until StP appears in the display.
3. Press the <UP/DOWN> buttons to
select the desired Stop Mode.
4. Once the desired selection has been
made, press the <PEDAL SWITCH>
to exit the Setup menu.
5. Play and stop the loop using the
<PEDAL SWITCH> to audition the
change.
6. Press the <STORE> button twice if
you wish to store the changes.
To Next Page
Loading...
