DigiTech JamMan SOLO XT User Manual

41
Playback Type
All phrases in the JamMan Solo XT are recorded as loops by default but they can be
changed to a Single phrase if desired. A Single phrase plays the recorded phrase once
and then stops. Slow repeated presses of the <PEDAL SWITCH> will restart Single
phrase playback from the beginning. Pressing the <PEDAL SWITCH> quickly two
times will start and then stop Single phrase playback. You can always change Single
phrases back to Loops later.
The available options for Playback Type are:
OPTION PLAYBACK TYPE DESCRIPTION
LoP
Loop
The phrase plays in a continuous loop until you
stop it.
Sin
Single Phrase
The phrase plays only once and then stops
automatically.

DigiTech JamMan SOLO XT Specifications

General

Sampling Rate	44.1 kHz
A/D/A Conversion	24-bit
Type	Looper Pedal
Storage	Internal, SD Card (optional)
Inputs	1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs	1 x 1/4" (mono)
USB	1 x Mini-B
Power Supply	9V DC power supply