EasyManuals Logo

DigiTech JamMan SOLO XT User Manual

DigiTech JamMan SOLO XT
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
19
Recording a Loop Using the AUX IN Jack
The JamMan Solo XT can record stereo loops using the AUX IN 1/8” mini jack. This
jack can be connected to portable music players for practicing or learning new songs.
Recording loops from the AUX IN jack is the same as recording your instrument
loops using the 1/4” LEFT/RIGHT INPUT jacks. It is recommended to use the Auto
Record option when recording from the AUX IN jack (see Setup > Auto Record” for
information on enabling Auto Record).
To record a loop from the AUX IN jack:
1. Select an empty memory location
using the <UP/DOWN> buttons
(LOOP and SINGLE LEDs will be off).
2. Press the <PEDAL SWITCH> to arm
the recording, indicated by a flashing
red STATUS LED.
3. Press play on your portable music
player.
4. As soon as you’re done recording,
press the <PEDAL SWITCH> again to
stop recording and initiate playback.
5. Quickly press the <PEDAL SWITCH>
twice to stop loop playback.
6. Press the <STORE> button twice if
you wish to store the loop.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiTech JamMan SOLO XT and is the answer not in the manual?

DigiTech JamMan SOLO XT Specifications

General IconGeneral
Sampling Rate44.1 kHz
A/D/A Conversion24-bit
TypeLooper Pedal
StorageInternal, SD Card (optional)
Inputs1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs1 x 1/4" (mono)
USB1 x Mini-B
Power Supply9V DC power supply

Related product manuals