27
Copying a Loop
The JamMan Solo XT provides a way to copy loops to other memory locations. This
can come in handy when you want to change loop attributes (such as tempo) or
experiment with overdubs without affecting the original loop.
To copy a loop to another memory location:
1. Select the loop which you would
like to copy using the <UP/DOWN>
buttons.
2. Press the <STORE> button once.
3. Use the <UP/DOWN> buttons to
select the desired memory location
for which to copy the loop. Make sure
you select an empty memory location
(LOOP and SINGLE LEDs will be off).
4. Press the <STORE> button again to
copy the loop to the newly selected
memory location.
NOTE: If dF appears in the display, this indicates the internal or external memory is full. Loops
should be archived using the JamManager XT librarian and then deleted from the JamMan Solo XT
to free up memory.
To Next Page
Loading...
Need help?
General
